Oil Pump Inspection

Coat the valve with engine oil and check that it falls smoothly into the valve hole by its own weight.

1. If the valve does not fall smoothly into the valve hole, replace the relief valve. If necessary, replace the timing belt case sub-assembly.
   

Install the rotors to the timing belt case with the marks on the rotors facing outward. Check that the rotors revolve smoothly.

Inspect the gear tip clearance.

1. Using a feeler gauge, measure the clearance between the drive and driven gear tips.
   

   Standard tip clearance:

   0.110 to 0.240 mm (0.00433 to 0.00945 in.)
   

   Maximum tip clearance:

   0.30 mm (0.0118 in.)
   

   1. If the tip clearance is more than the maximum, replace the gears as a set.
      

Inspect the gear body clearance.

1. Using a feeler gauge, measure the clearance between the driven gear and timing belt case.
   

   Standard body clearance:

   0.144 to 0.219 mm (0.00566 to 0.00862 in.)
   

   Maximum body clearance:

   0.40 mm (0.0157 in.)
   

   1. If the body clearance is more than the maximum, replace the gears as a set. If necessary, replace the timing belt case sub-assembly.
      

Inspect the gear side clearance.

1. Using a feeler gauge and precision straightedge, measure the clearance between the gears and precision straightedge.
   

   Standard side clearance:

   0.035 to 0.085 mm (0.00138 to 0.00335 in.)
   

   Maximum side clearance:

   0.15 mm (0.00590 in.)
   

   1. If the side clearance is more than the maximum, replace the gears as a set. If necessary, replace the timing belt case sub-assembly.