Engine Coolant Temperature Sensor Removal


  1. REMOVE FRONT BUMPER LOWER COVER

  2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

  3. DRAIN ENGINE COOLANT

  4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

Engine Coolant Temperature Sensor -- Removal



1. REMOVE FRONT BUMPER LOWER COVER

  1. Remove the clip, 5 bolts and front bumper lower cover.



2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

  1. Remove the 4 bolts and No. 1 engine under cover.



3. DRAIN ENGINE COOLANT
CAUTION:
Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

  1. Loosen the radiator drain cock plug.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Drain the coolant by removing the reservoir cap and, using a wrench, remove the vent plug.



  1. Loosen the cylinder block drain cock plug.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.1Kd-Ftv Engine Control.Ecd System.Engine Coolant Temperature Sensor Removal


    Text in Illustration
    *1
    		Radiator Reservoir
    		*2
    		Vent Plug
    *3
    		Radiator Drain Cock Plug
    		*4
    		Cylinder Block Drain Cock Plug


4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the engine coolant temperature sensor connector.

  1. Remove the engine coolant temperature sensor.

  1. Remove the gasket from the engine coolant temperature sensor.