Drive Belt Installation

Install the V belt.

While tightening bolt A, adjust the tension of the V belt.

Tighten bolts B and C.

Torque:

for bolt C:

69 N*m{704 kgf*cm, 51 ft.*lbf}

for bolt B:

18 N*m{184 kgf*cm, 13 ft.*lbf}

Check the tension of the V belt (LandCruiser RM000001KYZ00GX_01_0001.html).

Install the V belt.

While tightening bolt B, adjust the tension of the V belt.

Tighten nut A.

Torque:

39 N*m{400 kgf*cm, 29 ft.*lbf}

Check the tension of the V belt (LandCruiser RM000001KYZ00GX_01_0001.html).

Install the V belt.

Using a bar, adjust the tension of the V belt.

Tighten bolt A and nut B.

Torque:

for bolt:

48 N*m{489 kgf*cm, 35 ft.*lbf}

for nut :

64 N*m{653 kgf*cm, 47 ft.*lbf}

Check the tension of the V belt (LandCruiser RM000001KYZ00GX_01_0001.html).

Install the air cleaner case with the 3 bolts.

Torque:

12 N*m{122 kgf*cm, 9 ft.*lbf}

Insert the hinge part of the air cleaner cap and hose into the air cleaner case, and then attach the 4 hook clamps.

Connect the air cleaner cap sub-assembly with the clamp.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Attach the wire harness clamp.

Connect the 2 clamps and connector.

Install the front fender apron seal with the 4 clips.

Hook the engine under cover to the vehicle body as shown in the illustration.

Install the 4 bolts.

Torque:

29 N*m{296 kgf*cm, 21 ft.*lbf}

Install the front bumper cover lower with the 5 bolts and clip.

Torque:

8.0 N*m{82 kgf*cm, 71 in.*lbf}