Ignition Switch Inspection


  1. INSPECT IGNITION SWITCH ASSEMBLY

Ignition Switch -- Inspection



1. INSPECT IGNITION SWITCH ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.5L-E Starting.Starting System.Ignition Switch Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    All combinations of all terminals
    		LOCK
    		10 kΩ or higher
    2 (AM1) - 3 (ACC)
    		ACC
    		Below 1 Ω
    2 (AM1) - 3 (ACC)
    2 (AM1) - 4 (IG1)
    6 (IG2) - 7 (AM2)
    		ON
    		Below 1 Ω
    1 (ST1) - 2 (AM1)
    1 (ST1) - 4 (IG1)
    6 (IG2) - 7 (AM2)
    6 (IG2) - 8 (ST2)
    		START
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Ignition Switch)
    If the result is not as specified, replace the ignition switch assembly.