Engine Hood Courtesy Switch Removal
REMOVE UPPER RADIATOR SUPPORT SEAL
REMOVE RADIATOR GRILLE
REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
REMOVE HOOD LOCK RELEASE LEVER PROTECTOR
REMOVE HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
Engine Hood Courtesy Switch -- Removal |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
1. REMOVE UPPER RADIATOR SUPPORT SEAL |
Remove the 13 clips and upper radiator support seal.
2. REMOVE RADIATOR GRILLE |
Put protective tape around the radiator grille.
Remove the 4 screws.
Detach the 8 claws and remove the radiator grille.
Text in Illustration*1
| Protective Tape
|
3. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) |
Disconnect the sensor connector.
Remove the 3 bolts and millimeter wave radar sensor assembly.
4. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR |
Detach the 2 clamps, 2 guides and remove the hood lock release lever protector.
Text in Illustration*a
| Clamp
|
*b
| Guide
|
5. REMOVE HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH) |
Remove the 3 bolts.
Disconnect the connector.
Disconnect the hood lock control cable assembly and remove the hood lock assembly (engine hood courtesy switch).