Automatic Transmission System (For 2Tr-Fe) Manual Shifting Test

  1. PERFORM MANUAL SHIFTING TEST

Automatic Transmission System (For 2Tr-Fe) -- Manual Shifting Test



PERFORM MANUAL SHIFTING TEST
HINT:
  1. Using this test, it can be determined whether a problem is in an electrical circuit or if it is a mechanical problem in the transmission.
  2. If any abnormalities are found in the following test, the problem is in the transmission itself.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector of the transmission wire.

    HINT:
    It is possible to deactivate the electrical shift control by disconnecting the transmission wire. The gears can then be changed mechanically with the shift lever.

  2. Drive the vehicle with the transmission wire disconnected. Move the shift lever to each position to check whether the gear changes as shown in the table below.

    Shift Lever Position
    		Gear
    P
    		P
    R
    		R
    D
    		3rd

  3. Connect the connector of the transmission wire.

  4. Clear the DTCs (LandCruiser RM000000W7711DX.html).