Sliding Roof Convertible. Sliding Roof System Remote Control System Does Not Operate

SLIDING ROOF SYSTEM - Remote Control System does not Operate

DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the door key cylinder and wireless transmitter. When the sliding roof is operated by a remote control signal, sliding roof operation signals are input via LIN communication and the sliding roof motor starts moving.

INSPECTION PROCEDURE

NOTICE:

The sliding roof key-linked function and sliding roof wireless transmitter-linked function are linked with the power window key-linked function and power window wireless transmitter-linked function. Make sure that the power window and sliding roof customize settings are ON.
When the sliding roof drive gear sub-assembly is removed and reinstalled or replaced, the sliding roof drive gear sub-assembly must be initialized (LandCruiser RM000001VJR08IX.html).
Since the sliding roof system has functions that use LIN communication, first confirm that there is no malfunction in the LIN communication system with the How to Proceed with Troubleshooting procedure (LandCruiser RM000001VJJ055X.html).

1.CHECK POWER WINDOW CONTROL FUNCTION

Check the power window key-linked function and power window wireless transmitter-linked function (LandCruiser RM0000016810FQX.html).

OK:: The power window control functions operate normally.

Result
Result	Proceed to
OK	A
Wireless transmitter-linked function does not operate (w/ Entry and Start System)	B
Wireless transmitter-linked function does not operate (w/o Entry and Start System)	C
Key-linked function does not operate	D

GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (LandCruiser RM000000XX2077X.html)

GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (LandCruiser RM000001WY702OX.html)

GO TO POWER DOOR LOCK CONTROL SYSTEM (LandCruiser RM0000011G90BEX.html)

REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (LandCruiser RM000002LPC02UX.html)