Power Door Lock Control System Data List / Active Test

  1. DATA LIST

  1. ACTIVE TEST

Power Door Lock Control System -- Data List / Active Test



DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    RR Door Courtesy SW*
    		Rear door courtesy light switch RH signal / ON or OFF
    		ON: Rear door RH open
    OFF: Rear door RH closed
    		-
    RL Door Courtesy SW*
    		Rear door courtesy light switch LH signal / ON or OFF
    		ON: Rear door LH open
    OFF: Rear door LH closed
    		-
    Back Door Courtesy SW
    		Back door courtesy switch signal / ON or OFF
    		ON: Back door open
    OFF: Back door closed
    		-
    Back Door Lock Pos SW
    		Back door lock position switch signal / ON or OFF
    		ON: Back door unlocked
    OFF: Back door locked
    		-
    Door Key SW-Lock
    		Driver side door key-linked switch lock signal / ON or OFF
    		ON: Driver side door key cylinder turned to lock position
    OFF: Driver side door key cylinder not turned to lock position
    		-
    D Door Key SW-UL
    		Driver side door key-linked switch unlock signal / ON or OFF
    		ON: Driver side door key cylinder turned to unlock position
    OFF: Driver side door key cylinder not turned to unlock position
    		-
    FR Door Lock Pos
    		Front door lock position switch RH signal / LOCK or UNLOCK
    		LOCK: Front door RH locked
    UNLOCK: Front door RH unlocked
    		-
    FR Door Courtesy
    		Front door courtesy light switch RH signal / ON or OFF
    		ON: Front door RH closed
    OFF: Front door RH open
    		-
    FL Door Lock Pos
    		Front door lock position switch LH signal / LOCK or UNLOCK
    		LOCK: Front door LH locked
    UNLOCK: Front door LH unlocked
    		-
    FL Door Courtesy
    		Front door courtesy light switch LH signal / ON or OFF
    		ON: Front door LH closed
    OFF: Front door LH open
    		-
    RR-Door Lock Pos SW*
    		Rear door lock position switch RH signal / ON or OFF
    		ON: Rear door RH unlocked
    OFF: Rear door RH locked
    		-
    RL-Door Lock Pos SW*
    		Rear door lock position switch LH signal / ON or OFF
    		ON: Rear door LH unlocked
    OFF: Rear door LH locked
    		-
    The Number of DTC
    		Number of trouble codes / Min.: 0, Max.: 255
    		Number of DTCs stored
    		-

    1. *: for 5 Door

    Master Switch
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Door Lock Switch Status
    		Driver side door control switch lock signal / ON or OFF
    		ON: Lock side of driver side door control switch pushed
    OFF: Lock side of driver side door control switch not pushed
    		-
    Door Unlock Switch Status
    		Driver side door control switch unlock signal / ON or OFF
    		ON: Unlock side of driver side door control switch pushed
    OFF: Unlock side of driver side door control switch not pushed
    		-

ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Door Lock
    		Operate door lock motor
    		Unlock/Lock/OFF
    		-
    D-Door Unlock
    		Operate driver side door lock motor
    		ON/OFF
    		-