Navigation System (For Navigation Receiver Type) Voice Is Not Recognized

INSPECTION PROCEDURE

CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

INSPECTION PROCEDURE

HINT:

When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for T-Connect (w/ T-Connect Function).

1. Enter the "Microphone Check" screen. [Refer to Check Mic&Voice Recognition in Operation Check (LandCruiser RM000003SKF0LEX.html)]
   

2. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
   

3. Push the recording switch and perform voice recording.
   

   1. Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.
      
   2. Voice can be recorded for up to 5 seconds.
      

4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
   

   OK:

   All check results are normal.