Lighting System Data List / Active Test

  1. DATA LIST

  1. ACTIVE TEST

Lighting System -- Data List / Active Test



DATA LIST
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    ACC SW
    		Ignition switch ACC signal / ON or OFF
    		ON: Ignition switch ACC
    OFF: Ignition switch off
    		-
    IG SW
    		Ignition switch ON signal / ON or OFF
    		ON: Ignition switch ON
    OFF: Ignition switch off
    		-
    RR Door Courtesy SW*1
    		Rear door courtesy light switch RH signal / ON or OFF
    		ON: Rear door RH open
    OFF: Rear door RH closed
    		-
    RL Door Courtesy SW*1
    		Rear door courtesy light switch LH signal / ON or OFF
    		ON: Rear door LH open
    OFF: Rear door LH closed
    		-
    Back Door Courtesy SW
    		Back door courtesy switch signal / ON or OFF
    		ON: Back door open
    OFF: Back door closed
    		-
    Glass Hatch Courtesy Switch*2
    		Glass hatch courtesy switch signal / ON or OFF
    		ON: Glass hatch open
    OFF: Glass hatch closed
    		-
    FR Door Courtesy
    		Front door courtesy light switch RH signal / ON or OFF
    		ON: Front door RH closed
    OFF: Front door RH open
    		-
    FL Door Courtesy
    		Front door courtesy light switch LH signal / ON or OFF
    		ON: Front door LH closed
    OFF: Front door LH open
    		-
    Lounge Illumination Value SW (UP)*3
    		Room light switch (up) signal / ON or OFF
    		ON: Room light switch (up) on
    OFF: Room light switch (up) off
    		-
    Lounge Illumination Value SW (Dwn)*3
    		Room light switch (down) signal / ON or OFF
    		ON: Room light switch (down) on
    OFF: Room light switch (down) off
    		-

    1. *1: for 5 Door
    2. *2: w/ Glass Hatch Opener System
    3. *3: w/ Door Illumination

ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Illuminated Entry System
    		Map light, No. 1 room light and No. 2 room light
    		ON/OFF
    		-
    Step Light Operation*1
    		Interior foot light, inside handle illumination, ornament illumination and door pocket illumination
    		ON/OFF
    		-
    Interior Panel Relay
    		Interior panel relay
    		ON/OFF
    		-
    Cent Consol Spot LGT
    		Center console spot light
    		ON/OFF
    		-
    Dimmer Signal
    		Illumination dimming
    		ON/OFF
    		-
    Relay for Interior Light Auto Cut Function*2
    		DOME relay
    		ON/OFF
    		-

    1. *1: w/ Interior Foot Light
    2. *2: After turning the ignition switch on, proceed to the preceding screen of the active test screen with the intelligent tester and turn the ignition switch off, and perform the active test.