Navigation System (For Navigation Receiver Type) Disc Cannot Be Inserted Or Is Ejected Right After Insertion

INSPECTION PROCEDURE

CHECK IF A PROPER DISC IS INSERTED

CHECK THAT DISC IS INSERTED PROPERLY

CHECK DISC

REPLACE DISC WITH ANOTHER AND RECHECK

INSPECTION PROCEDURE

HINT:

When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).

1. Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
   

   OK:

   Disc is normal.
   

   HINT:

   1. Translucent or uniquely-shaped CDs cannot be played.
      
   2. CDs and DVDs with adhesive paper labels should not be played.
      
   3. Commercial audio CDs and DVDs can be played.
      
   4. CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
      
   5. MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.
      
   6. For details on playable CDs and DVDs, refer to Owner's Manual.
      

1. Check if the disc is inserted upside down.
   

   OK:

   The disc is properly inserted.
   

1. Disc cleaning
   

   1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
      

      OK:

      Malfunction disappears.
      

      NOTICE:

      Do not use a conventional record cleaner or antistatic preservative.

1. Replace the disc with a known good one and check that the malfunction disappears.
   

   OK:

   Malfunction disappears.