Starter (For 2.2 Kw Type) Installation


  1. INSTALL STARTER ASSEMBLY

  2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

  3. INSTALL REAR ENGINE UNDER COVER ASSEMBLY

  4. INSTALL FRONT NO. 1 FENDER APRON TO FRAME SEAL LH

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter (For 2.2 Kw Type) -- Installation



1. INSTALL STARTER ASSEMBLY

  1. for Manual Transmission:
    Install the starter assembly with the bolt and nut.

    Torque:
    68 N*m{693 kgf*cm, 50 ft.*lbf}

  1. for Automatic Transmission:
    Install the starter assembly with the bolt and 2 nuts.

    Torque:
    68 N*m{693 kgf*cm, 50 ft.*lbf}

  1. Connect the starter wire with the nut.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}

  1. Connect the starter connector.

  1. Install the terminal cap.



2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

  1. Connect the release cylinder with the 2 bolts.

    Torque:
    12 N*m{120 kgf*cm, 9 ft.*lbf}

  1. Install a new clip to the flexible hose.



3. INSTALL REAR ENGINE UNDER COVER ASSEMBLY

  1. Install the rear engine under cover with the 4 bolts.

    Torque:
    29 N*m{296 kgf*cm, 21 ft.*lbf}


4. INSTALL FRONT NO. 1 FENDER APRON TO FRAME SEAL LH

  1. Install the frame seal with the 5 clips.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).