Shift Lever Inspection

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Do not disconnect the shift lock control ECU connector.

Standard Voltage and Resistance:

Tester Connection	Condition	Specified Condition
G37-6 (ACC) - G37-8 (E)	Ignition switch ON	10 to 14 V
	Ignition switch ACC	10 to 14 V
	Ignition switch off	Below 1 V
G37-7 (STP) - G37-8 (E)	Brake pedal depressed	10 to 14 V
	Brake pedal released	Below 1 V
G37-12 (KLS+) - G37-8 (E)	1. Ignition switch ACC and shift lever in P	Below 1 V
	2. Ignition switch ACC and shift lever not in P (Within approx. 1 second)	7.5 to 11 V
	3. Ignition switch ACC and shift lever not in P (After approx. 2 seconds)	6 to 9 V
G37-1 (IG) - G37-8 (E)	Ignition switch ON	10 to 14 V
	Ignition switch off	Below 1 V
G37-8 (E) - Body ground	Always	Below 1 Ω