Audio And Visual System (For Radio And Display Type) Usb Audio System Recognition/Play Error

INSPECTION PROCEDURE

CHECK USB DEVICE OR "iPod"

FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK

REPLACE USB DEVICE OR "iPod"

CHECK USB DEVICE OR "iPod"

INSPECTION PROCEDURE

HINT:

1. For vehicles equipped with an Extension Module, refer to optional equipment's manuals.
   
2. When a large amount of data is in a USB device, it may take a while to before play begins.
   
3. When using a USB device, files that are copy protected or encrypted cannot be played.
   
4. When files are not played in the sorted order, perform the following procedure before inspection.
   
1. Add numbers in front of the file names.
   
2. Put the files in a folder and copy the folder data to the USB device.
   

1. Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
   

2. Check if playable files are present on the USB device or "iPod".
   

   HINT:

   Refer to System Description for playable files (HILUX_TGN26 RM000003YVK017X.html).

3. Check if the USB device is a compatible format or "iPod" is a compatible version.
   

   HINT:

   Refer to System Description for compatible formats and versions (HILUX_TGN26 RM000003YVK017X.html).

   Result

   Result	Proceed to
   No playable files exist, or incompatible device format or version	A
   Playable files exist, and compatible device format or version	B

1. Delete all files in the USB device or "iPod" and format/ restore it.
   

   NOTICE:

   Formatting a USB device or restoring an "iPod" erases all music on the device. Make sure that back up music data is available before performing this operation.

2. Save the data again and check if it can be played on the in-vehicle device.
   

   OK:

   Malfunction disappears.
   

1. Turn the ignition switch off.
   

2. Turn the ignition switch to ACC.
   

3. Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
   

   HINT:

   1. If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
      
   2. Refer to System Description for compatible formats and versions (HILUX_TGN26 RM000003YVK017X.html).
      

1. Check if USB device or "iPod" is recognized by radio and display receiver assembly, or if information such as track, artist and album names are displayed on screen.
   

   OK:

   USB device or "iPod" is recognized or track information such as track, artist and album names are displayed.