Oil And Oil Filter Replacement

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Kd-Ftv Lubrication. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. REMOVE NO. 2 ENGINE UNDER COVER

  2. DRAIN ENGINE OIL

  3. REMOVE OIL FILTER SUB-ASSEMBLY

  4. INSTALL OIL FILTER SUB-ASSEMBLY

  5. ADD ENGINE OIL

  6. INSPECT FOR OIL LEAK

  7. INSPECT ENGINE OIL LEVEL

  8. INSTALL NO. 2 ENGINE UNDER COVER

Oil And Oil Filter -- Replacement


CAUTION:
  1. Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
  2. Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be washed with soap and water, or use waterless hand cleaner, to remove any used engine oil thoroughly. Do not use gasoline, thinners or solvents.
  3. In order to protect the environment, used oil and used oil filters must be disposed of at designated disposal sites.


1. REMOVE NO. 2 ENGINE UNDER COVER


2. DRAIN ENGINE OIL

  1. Remove the oil filler cap.

  1. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

  1. Wipe the oil pan and drain plug.

  1. Install a new gasket and the oil pan drain plug.

    Torque:
    34 N*m{347 kgf*cm, 25 ft.*lbf}


3. REMOVE OIL FILTER SUB-ASSEMBLY


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.2Kd-Ftv Lubrication.Lubrication System.Oil And Oil Filter Replacement

  1. Using SST, remove the oil filter.

    SST
    09228-07501
    HINT:
    Insert the drain hose in the oil filter. Put the disposal container beneath the drain hose to collect the oil from the oil filter.


4. INSTALL OIL FILTER SUB-ASSEMBLY

  1. Check and clean the oil filter installation surface.

  1. Apply clean engine oil to the gasket of a new oil filter.

  1. Lightly screw the oil filter into place by hand. Tighten it until the gasket contacts the seat.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.2Kd-Ftv Lubrication.Lubrication System.Oil And Oil Filter Replacement

  1. Using SST, tighten the oil filter. Depending on the space available, choose from the following.

    SST
    09228-07501

    1. If enough space is available, use a torque wrench to tighten the oil filter.

      Torque:
      12 N*m{122 kgf*cm, 9 ft.*lbf}

    2. If enough space is not available to use a torque wrench, tighten the oil filter 3/4 of a turn by hand or with a common wrench.



5. ADD ENGINE OIL

  1. Add new engine oil.

    Standard Oil Grade:

    Oil Grade
    		Oil Viscosity (SAE)
    G-DLD1, API CF-4, CF or ACEA B1
    		- 5W-30
    - 10W-30
    - 15W-40
    - 20W-50

    Standard Capacity:

    Item
    		Specified Condition
    Drain and refill without oil filter change
    		6.6 liters (7.0 US qts, 5.8 Imp. qts)
    Drain and refill with oil filter change
    		6.9 liters (7.3 US qts, 6.1 Imp. qts)
    Dry fill
    		7.4 liters (7.8 US qts, 6.5 Imp. qts)

  1. Install the oil filler cap.



6. INSPECT FOR OIL LEAK

  1. Start the engine. Make sure that there are no oil leaks from the areas that were worked on.



7. INSPECT ENGINE OIL LEVEL

  1. Warm up the engine, stop the engine and wait 5 minutes. The engine oil level should be between the dipstick low level mark and full level mark.
    If low, check for leakage and add oil up to the full level mark.

    NOTICE:
    Do not fill engine oil above the full level mark.


8. INSTALL NO. 2 ENGINE UNDER COVER
Torque:
28 N*m{286 kgf*cm, 21 ft.*lbf}