Solenoid Valve (For Fuel Cut Control) Inspection

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1 - 2	18 to 28°C (64 to 82°F)	20 to 22 Ω
1 - Body ground	Always	10 kΩ or higher
2 - Body ground

Check the operation of the solenoid valve assembly.

1. Check that air does not flow from port E to port F.
   

   Text in Illustration

   *a	Does Not Flow
   	Air





2. Apply battery voltage across terminals 1 and 2.
   

   Text in Illustration

   Air

3. Check that air flows from port E to port F.
   If the result is not as specified, replace the solenoid valve assembly.