Tire And Wheel System Inspection

Check the tires for wear and proper inflation pressure.

Cold Tire Inflation Pressure:

Model	Tire Size	Front kPa (kgf/cm2, psi)	Rear kPa (kgf/cm2, psi)
Double Cab	205R16C 110/108S	240 (2.4, 35)	240 (2.4, 35)
	255/70R15C 112/110S	200 (2.0, 29)	200 (2.0, 29)
	265/70R16 112S	200 (2.0, 29)	200 (2.0, 29)
	265/65R17 112S	200 (2.0, 29)	200 (2.0, 29)
Single Cab	205R16C 110/108S	240 (2.4, 35)	240 (2.4, 35)
	255/70R15C 112/110S	200 (2.0, 29)	200 (2.0, 29)

Using a dial indicator, check the runout of the tires.

Maximum tire runout:

3.0 mm (0.118 in.)

Rotate the tires as shown in the illustration.

Check and adjust the off-the-car balance.

Standard Imbalance after Adjustment:

Tire Size	Balance Weight
205R16C 110/108S 255/70R15C 112/110S 265/70R16 112S	14 g (0.030 lb) or less
265/65R17 112S	13 g (0.028 lb) or less

HINT:

1. The inner side balance weight should be installed by clipping it to the rim.
   
2. If necessary, check and adjust the on-the-car balance.
   

Using a dial indicator, check for looseness near the center of the front axle hub.

Maximum:

0.05 mm (0.00197 in.)

NOTICE:

Make sure that the dial indicator is set perpendicular to the measurement surface.

Using a dial indicator, check for runout on the surface of the front axle hub inside the front axle hub bolt.

Maximum:

0.05 mm (0.00197 in.)

NOTICE:

Make sure that the dial indicator is set perpendicular to the measurement surface.

Using a dial indicator, measure the shaft runout and flange runout of the rear axle shaft.

Maximum runout:

Item	Specified Condition
Shaft runout	1.5 mm (0.0591 in.)
Flange runout	0.10 mm (0.00394 in.)