Brake Master Cylinder (For Tasa Made) Inspection

Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake System (Other). Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSPECT AND ADJUST BRAKE BOOSTER PUSH ROD

Brake Master Cylinder (For Tasa Made) -- Inspection



1. INSPECT AND ADJUST BRAKE BOOSTER PUSH ROD
HINT:
Adjust the booster push rod when the master cylinder is replaced with a new one. Adjustment is not necessary when the master cylinder is reinstalled and the booster is replaced with a new one.


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Brake System (Other).Brake System.Brake Master Cylinder (For Tasa Made) Inspection

  1. Set SST on the master cylinder and lower the rod of SST until it just touches the piston.

    Text in Illustration
    *1
    		Apply Chalk
    SST
    09737-00013
    HINT:
    SST 09737-00012 can also be used.

  1. Apply chalk to the flat tip of the SST. Turn SST upside down and measure the clearance between the brake booster push rod and SST.

    Standard clearance:
    0 mm (0 in.)
    If there is clearance between the main body of SST and the shell of the brake booster, the push rod is protruding too far.
    If the chalk does not stick to tip of the brake booster push rod, the push rod protrusion is insufficient.


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Brake System (Other).Brake System.Brake Master Cylinder (For Tasa Made) Inspection

  1. If the clearance is not as specified, adjust the length by holding the rod using SST and turning the tip of the rod using a 7 mm socket driver.

    SST
    09737-00020
    NOTICE:
    Check the push rod clearance again after adjusting.