Air Conditioning Panel (For Automatic Air Conditioning System) Removal

Vehicle Interior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Heating Air Conditioning. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

  2. REMOVE INTEGRATION PANEL SUB-ASSEMBLY

Air Conditioning Panel (For Automatic Air Conditioning System) -- Removal



1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


  1. for Manual Air Conditioning System:



      Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Air Conditioning Panel (For Automatic Air Conditioning System) Removal

    1. Put protective tape around the center instrument cluster finish panel.

      Text in Illustration
      *1
      		Protective Tape

    2. Using a moulding remover, detach the 10 claws and 4 clips.



      3. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

    3. Detach the 4 claws and disconnect the air conditioner control.

    4. Disconnect the connectors and remove the center instrument cluster finish panel.



  1. for Automatic Air Conditioning System:



      Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Air Conditioning Panel (For Automatic Air Conditioning System) Removal

    1. Put protective tape around the center instrument cluster finish panel.

      Text in Illustration
      *1
      		Protective Tape

    2. Using a moulding remover, detach the 8 claws and 4 clips.

    3. Disconnect the connectors and remove the center instrument cluster finish panel.



2. REMOVE INTEGRATION PANEL SUB-ASSEMBLY


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 4 screws.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 4 screws.

  1. Detach the 3 claws and disconnect the lower heater control base.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Disconnect the No. 1 cooler wire from the integration panel sub-assembly (air conditioning panel) as shown in the illustration.

    NOTICE:
    Before performing the procedure above, the hazard switch must be turned off. If the switch is on while the base is removed, damage will occur to the switch.