Front Wiper Motor Inspection

Vehicle Exterior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

Wiper Washer. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

Front Wiper Motor -- Inspection

1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Wiper Washer.Wiper And Washer System.Front Wiper Motor Inspection

Text in Illustration
*a	Component without harness connected (Windshield Wiper Motor Assembly

Check the LO operation.
1. Connect the battery's positive (+) lead to terminal 1 (+1) and the negative (-) lead to terminal 5 (E), and check that the motor operates at low speed (LO).
  OK:
  Motor operates at low speed (LO).
  If the result is not as specified, replace the motor assembly.

Check the HI operation.
1. Connect the battery's positive (+) lead to terminal 4 (+2) and the negative (-) lead to terminal 5 (E), and check that the motor operates at high speed (HI).
  OK:
  Motor operates at high speed (HI).
  If the result is not as specified, replace the motor assembly.

Check the automatic stop operation.
1. Connect the battery's positive (+) lead to terminal 1 (+1) and the negative (-) lead to terminal 5 (E). With the motor rotating at low speed (LO), disconnect terminal 1 (+1) to stop the wiper motor operation at any position other than the automatic stop position.
2. Using SST, connect terminals 3 (+S) and 1 (+1). Then connect the battery's positive (+) lead to terminal 2 (B) to restart the motor operation at low speed (LO).
  SST
  09843-18040
3. Check that the motor stops automatically at the automatic stop position.
  Text in Illustration
  *a
  Automatic Stop Position
  Standard Area
  Standard Condition
  A
  14° to -1°
  OK:
  Refer to the illustration.
  If the result is not as specified, replace the motor assembly.