Starter (For Denso Made) Installation

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Kd-Ftv Starting. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSTALL STARTER ASSEMBLY

  2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

  3. INSTALL FRONT FENDER SEAL

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter (For Denso Made) -- Installation



1. INSTALL STARTER ASSEMBLY

  1. Connect the ground cable and install the starter with the nut and bolt.

    Torque:
    68 N*m{693 kgf*cm, 50 ft.*lbf}

  1. Install the starter wire to terminal 30 with the nut.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}

  1. Connect the starter connector.



2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

  1. Install the clutch release cylinder with the 2 bolts.

    Torque:
    for TR Engine series:
    12 N*m{120 kgf*cm, 9 ft.*lbf}
    for 1KD-FTV, 2KD-FTV:
    12 N*m{119 kgf*cm, 9 ft.*lbf}


3. INSTALL FRONT FENDER SEAL

  1. Install the front fender seal with the 5 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3003X.html).