Vane Pump (For Tr Series Engine) Installation

Install the vane pump with the 2 bolts.

Torque:

21 N*m{214 kgf*cm, 15 ft.*lbf}

Connect the connector to the oil pressure switch.

Install a new gasket and the pressure feed tube to the vane pump with the union bolt.

Torque:

49 N*m{500 kgf*cm, 36 ft.*lbf}

HINT:

Make sure that the stopper of the pressure feed tube touches the front housing.

Connect the hose with the clip.

Install the fan and generator V belt to all the pulleys except the V-ribbed belt tensioner pulley.

Use the hexagon-shaped part indicated by the arrow in the illustration to move the tensioner pulley downward, and then install the fan and generator V belt to the tensioner pulley.

NOTICE:

1. The backside of the fan and generator V belt should face the tensioner pulley.
   
2. Check that the fan and generator V belt is properly installed to each pulley.