Rear Speed Sensor Installation

Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake Control Dynamic Control Systems. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSTALL REAR SPEED SENSOR

  2. INSTALL REAR WHEEL

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. CHECK SPEED SENSOR SIGNAL

Rear Speed Sensor -- Installation



1. INSTALL REAR SPEED SENSOR


  1. Install the speed sensor RH with the bolt.


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Brake Control Dynamic Control Systems.Anti-Lock Brake System.Rear Speed Sensor Installation

    Torque:
    8.5 N*m{87 kgf*cm, 75 in.*lbf}
    NOTICE:
    1. Make sure there are no pieces of iron or other foreign matter attached to the sensor tip.
    2. While inserting the speed sensor into the axle housing hole, do not strike or damage the sensor tip.
    3. After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the axle housing.

  1. Install the harness clamp with the bolt.

    Torque:
    8.5 N*m{87 kgf*cm, 75 in.*lbf}
    NOTICE:
    1. When installing the clamp, do not twist the wire harness.
    2. Make sure the clamp rotation stopper touches the installation position.

  1. Attach the 2 clamps.

    NOTICE:
    When attaching the clamps, do not twist the wire harness.

  1. Attach the connector.

    NOTICE:
    1. Securely attach the connector.
    2. When attaching the connector, do not twist the wire harness.

  1. Connect the connector.

    NOTICE:
    1. Securely connect the connector.
    2. When connecting the connector, do not twist the wire harness.


  1. Install the speed sensor LH with the bolt.


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Brake Control Dynamic Control Systems.Anti-Lock Brake System.Rear Speed Sensor Installation

    Torque:
    8.5 N*m{87 kgf*cm, 75 in.*lbf}
    NOTICE:
    1. Make sure there are no pieces of iron or other foreign matter attached to the sensor tip.
    2. While inserting the speed sensor into the axle housing hole, do not strike or damage the sensor tip.
    3. After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the axle housing.

  1. Install the 2 harness clamps with the 2 bolts.

    Torque:
    for bolt A:
    8.5 N*m{87 kgf*cm, 75 in.*lbf}
    for bolt B:
    32 N*m{326 kgf*cm, 24 ft.*lbf}
    NOTICE:
    1. When installing the clamps, do not twist the wire harness.
    2. Make sure the clamp rotation stopper touches the installation position.

  1. Attach the clamp.

    NOTICE:
    When attaching the clamp, do not twist the wire harness.


2. INSTALL REAR WHEEL

  1. Install the wheel.

    Torque:
    105 N*m{1070 kgf*cm, 77 ft.*lbf}


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3008X.html).


4. CHECK SPEED SENSOR SIGNAL

  1. w/ ABS:
    (HILUX_TGN26 RM000000XHT090X.html)

  1. w/ VSC:
    (HILUX_TGN26 RM000000XHT091X.html)