Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
1Gr-Fe Engine Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Throttle Body -- Removal |
| 1. DRAIN ENGINE COOLANT |
- CAUTION:
- Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
Text in Illustration *1 Radiator Cap *2 Reservoir Cap *3 Cylinder Block Water Drain Cock Plug *4 Reservoir Tank *5 Radiator Drain Cock Plug - -
Loosen the radiator drain cock plug.
Remove the radiator cap and drain the coolant.
- HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.
Loosen the cylinder block water drain cock plug and drain the coolant from the engine.
| 2. REMOVE V-BANK COVER |
Remove the 2 nuts and V-bank cover.
 |
| 3. DISCONNECT NO. 2 PCV HOSE |
Disconnect the clamp and No. 2 PCV hose.
 |
| 4. REMOVE AIR CLEANER ASSEMBLY |
Disconnect the vacuum hose.
 |
Disconnect the mass air flow meter connector.
Detach the 2 wire harness clamps.
Loosen the 2 hose clamps.
 |
Remove the 2 bolts and air cleaner.
| 5. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY |
Disconnect the No. 4 and No. 5 water by-pass hoses.
 |
Disconnect the throttle body with motor connector.
 |
Remove the 4 bolts and throttle body with motor assembly.
Remove the gasket from the intake air surge tank.