PRECAUTION
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
REMOVE 4 WHEEL DRIVE CONTROL ECU
REMOVE ECM
REMOVE NO. 1 ECM BRACKET
REMOVE NO. 2 ECM BRACKET
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (HILUX_TGN26 RM000004QR1006X.html).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3009X.html).
| 3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
Text in Illustration*1
| Stopper
|
Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
Text in Illustration*1
| Hinge
|
| 4. REMOVE 4 WHEEL DRIVE CONTROL ECU |
Disconnect the connector.
Remove the bolt and 4 wheel drive control ECU.
Disconnect the 5 ECM connectors.
Remove the bolt, 2 nuts and ECM.
| 6. REMOVE NO. 1 ECM BRACKET |
Remove the 3 screws and No. 1 ECM bracket.
| 7. REMOVE NO. 2 ECM BRACKET |
Remove the 2 screws and No. 2 ECM bracket.
