Cruise Control System Fail-Safe Chart

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Cruise Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

Cruise Control System -- Fail-Safe Chart


HINT:
If the following conditions are detected while cruise control is in operation, the system clears the stored vehicle speed in the ECM and cancels cruise control.

Vehicle Condition
Auto Cancel Condition
Fail-safe Deactivation Condition
Cruise control indicator light blinks
  1. There is an open or short in the stop light switch circuit
  2. There is a problem with the vehicle speed signal
Turn the cruise control main switch on again
  1. There is a problem with the input circuit of the stop light switch circuit
  2. There is a problem with the cancel circuit
  3. There is a problem with the ECD system
  1. Turn the cruise control main switch on again
  2. Turn the ignition switch off and then on again
Cruise control indicator light remains on
(Cruise control is canceled)
Under the following conditions, the stored vehicle speed is maintained:
  1. The vehicle speed is less than the low speed limit (approximately 40 km/h (25 mph)) while running with the cruise control on
  2. The VSC system is operated
Push the cruise control main switch to RES / ACC
  1. The vehicle speed is less than the stored speed by approximately 16 km/h (10 mph) or more
Push the cruise control main switch to SET / COAST
Cruise control indicator light goes off
There is a problem with the fuel injection system
Fuel injection system returns to normal