Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake Control Dynamic Control Systems. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Steering Angle Sensor (W/ Vsc) -- Removal |
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (HILUX_TGN26 RM000004QR1006X.html).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR300CX.html).
| 3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD |
| 4. REMOVE STEERING PAD |
for 3 Spoke:
(HILUX_TGN26 RM0000033RT0AGX_02_0029.html)
for 4 Spoke:
(HILUX_TGN26 RM0000033RT0AGX_02_0019.html)
| 5. REMOVE STEERING WHEEL ASSEMBLY |
| 6. REMOVE STEERING COLUMN LOWER COVER |
Remove the 3 bolts and lower cover.
 |
| 7. REMOVE STEERING COLUMN UPPER COVER |
Detach the claw and remove the upper cover.
| 8. REMOVE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY |
- NOTICE:
- Do not replace the spiral cable with the battery connected and the ignition switch ON.
- Do not rotate the spiral cable with the battery connected and the ignition switch ON.
- Make sure that the steering wheel is installed and aligned straight when inspecting the steering angle sensor.
- Do not remove the steering angle sensor from the spiral cable.