Yaw Rate And Acceleration Sensor (W/ Vsc) Removal

Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake Control Dynamic Control Systems. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT SEAT ASSEMBLY RH

  4. REMOVE FLOOR CARPET COVER

  5. REMOVE SENSOR BRACKET

  6. REMOVE YAW RATE SENSOR ASSEMBLY

Yaw Rate And Acceleration Sensor (W/ Vsc) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (HILUX_TGN26 RM000004QR1006X.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3008X.html).


3. REMOVE FRONT SEAT ASSEMBLY RH

  1. for Power Seat:
    (HILUX_TGN26 RM000003NZX00UX.html)

  1. for Separate Seat Type:
    (HILUX_TGN26 RM000000Z8U08XX.html)



4. REMOVE FLOOR CARPET COVER


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 4 claws and remove the floor carpet cover.



5. REMOVE SENSOR BRACKET

  1. Remove the 2 bolts and sensor bracket.



6. REMOVE YAW RATE SENSOR ASSEMBLY


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Brake Control Dynamic Control Systems.Anti-Lock Brake System.Yaw Rate And Acceleration Sensor (W/ Vsc) Removal

  1. Remove the yaw rate sensor.

  1. Disconnect the connector.