Headlight Assembly Installation

Connect each connector.

Engage the claw.

Install the headlight assembly with the 2 bolts and screw.

Torque:

5.4 N*m{55 kgf*cm, 48 in.*lbf}

Connect the 2 fog light connectors.

Engage the 6 claws and install the front bumper assembly as shown in the illustration.

Install the 2 screws, 7 clips and 2 bolts.

Torque:

Bolt:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Install the pin hold clip.

NOTICE:

Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT:

Use the same procedure for the RH side and LH side.

w/ Fog Light:

1. Connect the 2 fog light connectors.
   

Engage the 6 claws and install the front bumper assembly as shown in the illustration.

Install the 4 screws, 7 clips and 2 bolts.

Torque:

Bolt:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Install the pin hold clip.

NOTICE:

Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT:

Use the same procedure for the RH side and LH side.

Install the No. 4 engine under cover with the 4 screws and 4 clips.

Install the 2 radiator grille protectors.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}