Engine Coolant Temperature Sensor Removal

Hold the rear of the cover and raise it to disengage the 2 clips on the rear of the cover. Continue to raise the cover to disengage the 2 clips on the front of the cover to remove the cover.

NOTICE:

Attempting to disengage both front and rear clips at the same time may cause the cover to break.

Loosen the lower radiator drain cock plug.

CAUTION:

Do not loosen the lower radiator drain cock plug while the engine and radiator are still hot.

Pressurized, hot engine coolant and steam may be released and cause serious burns.

HINT:

Collect the coolant in a container and dispose of it according to the regulations in your area.

Remove the radiator cap.

Disconnect the mass air flow meter connector and the 2 wire harness clamps.

Disconnect the ventilation hose and loosen the hose clamp.

Release the 2 clamps and remove the air cleaner cap sub-assembly with hose.

Disconnect the engine coolant temperature sensor connector.

Remove the engine coolant temperature sensor.