Wireless Door Lock Buzzer Removal

Remove the 2 radiator grille protectors.

Remove the 4 screws, 4 clips and No. 4 engine under cover.

Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

HINT:

Use the same procedure for the RH side and LH side.

Put protective tape around the front bumper assembly.

Remove the 2 screws, 2 bolts and 7 clips.

Disengage the 6 claws and remove the front bumper assembly as shown in the illustration.

Disconnect the 2 fog light connectors.

Put protective tape around the side mudguard.

Remove the 2 clips.

Remove the 3 screws.

Remove the 9 retainers.

Disengage the 8 clips and remove the side mudguard.

Remove the 8 clips and 3 screws.

Remove the 3 grommets and the front fender liner.

HINT:

The grommets need to be replaced with new ones because they will break when they are removed.

Disconnect the connector.

Disconnect the clamp and remove the wireless door lock buzzer.