Engine Hybrid System. Corolla. Zre142 Aze141
2Az-Fe Engine Control. Corolla. Zre142 Aze141
Ecm -- Removal |
| 1. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL |
| 2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY |
Remove the 2 nuts and No. 1 engine cover sub-assembly.
 |
| 3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE |
Disconnect the mass air flow meter connector.
 |
Separate the 2 wire harness clamps.
Disconnect the No. 1 vacuum switching valve connector and the 2 vacuum hoses.
 |
Disconnect the ventilation hose.
 |
Loosen the No. 1 air cleaner hose clamp, release the 3 air cleaner assembly clamps and remove the air cleaner cap sub-assembly with No. 1 hose.
 |
| 4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY |
Remove the air cleaner filter element.
Disconnect the clamp of the engine wire.
 |
Remove the 3 bolts and air cleaner case.
| 5. REMOVE ECM |
Separate the wire harness clamp.
 |
Disconnect the 2 ECM connectors.
Push the locks on the 2 levers, then raise the levers, and disconnect the 2 ECM connectors.
- NOTICE:
- After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the connectors.
Remove the 3 bolts and the ECM.
 |
Remove the 4 screws and 2 ECM brackets.
 |