Dtc C2171/71 Transmitter Id Not Registered

Suspension. Corolla. Zre142 Aze141
Tire Pressure Monitoring. Corolla. Zre142 Aze141

DESCRIPTION

INSPECTION PROCEDURE

CONFIRM REGISTRATION CONDITION (REGISTERED ID CODES)

PERFORM REGISTRATION (TRANSMITTER ID)

PERFORM INITIALIZATION

READ VALUE USING TECHSTREAM (DATA LIST)

DTC C2171/71 Transmitter ID not Registered


DESCRIPTION

The IDs of each tire pressure warning valve and transmitter are registered to the tire pressure warning ECU.
When the ECU detects that transmitter ID code is not registered in the ECU, a DTC is output.

DTC No.
DTC Detection Condition
Trouble Area
C2171/71
Transmitter ID code is not registered. (When an ID code is unregistered for 3 minutes or more)
Tire pressure warning ECU

INSPECTION PROCEDURE

NOTICE:
  1. When replacing the tire pressure warning ECU, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
  2. It is necessary to perform initialization (COROLLA_ZRE142 RM000000XMZ07PX.html) after registration (COROLLA_ZRE142 RM000000XN108OX.html) of the transmitter IDs into the tire pressure warning ECU if the ECU has been replaced.
1.CONFIRM REGISTRATION CONDITION (REGISTERED ID CODES)

  1. Turn the ignition switch off.

  1. Connect the Techstream to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the Techstream on.

  1. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

  1. Check the values by referring to the table below.

    Tire Pressure Monitor
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Registered ID1 code
    		Registered ID1 code/
    min.: 0
    max.: FFFFFFF*
    		The ID No. registered in the transmitter ID1 is displayed
    		-
    Registered ID2 code
    		Registered ID2 code/
    min.: 0
    max.: FFFFFFF*
    		The ID No. registered in the transmitter ID2 is displayed
    		-
    Registered ID3 code
    		Registered ID3 code/
    min.: 0
    max.: FFFFFFF*
    		The ID No. registered in the transmitter ID3 is displayed
    		-
    Registered ID4 code
    		Registered ID4 code/
    min.: 0
    max.: FFFFFFF*
    		The ID No. registered in the transmitter ID4 is displayed
    		-

    HINT:
    *: Displayed only when the ID No. is not registered.
    OK:
    The registered transmitter ID codes are displayed on the Techstream.


NG
Go to step 2
OK

REPLACE TIRE PRESSURE WARNING ECU (COROLLA_ZRE142 RM0000024T8027X.html)

2.PERFORM REGISTRATION (TRANSMITTER ID)

  1. Register the transmitter IDs for all the wheels (COROLLA_ZRE142 RM000000XN108OX.html).


NEXT


3.PERFORM INITIALIZATION

  1. Perform initialization (COROLLA_ZRE142 RM000000XMZ07PX.html).


NEXT


4.READ VALUE USING TECHSTREAM (DATA LIST)

  1. Turn the ignition switch off.

  1. Connect the Techstream to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the Techstream on.

  1. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

  1. Check the values by referring to the table below.

    Tire Pressure Monitor
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    ID1 Tire Inflation Pressure
    		ID1 tire inflation pressure/
    min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi)
    max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi)
    		Actual tire inflation pressure
    		If 0 kPa (0 kgf/cm2, 0 psi) is displayed for absolute pressure or -100 kPa (-1.0 kgf/cm2, -14 psi) is displayed for relative pressure, data has not been received.*
    ID2 Tire Inflation Pressure
    		ID2 tire inflation pressure /
    min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi)
    max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi)
    		Actual tire inflation pressure
    		If 0 kPa (0 kgf/cm2, 0 psi) is displayed for absolute pressure or -100 kPa (-1.0 kgf/cm2, -14 psi) is displayed for relative pressure, data has not been received.*
    ID3 Tire Inflation Pressure
    		ID3 tire inflation pressure /
    min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi)
    max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi)
    		Actual tire inflation pressure
    		If 0 kPa (0 kgf/cm2, 0 psi) is displayed for absolute pressure or -100 kPa (-1.0 kgf/cm2, -14 psi) is displayed for relative pressure, data has not been received.*
    ID4 Tire Inflation Pressure
    		ID4 tire inflation pressure /
    min.: Absolute pressure / 0 kPa (0 kgf/cm2, 0 psi), Relative pressure / -100 kPa (-1.0 kgf/cm2, -14 psi)
    max.: Absolute pressure / 638 kPa (6.4 kgf/cm2, 93 psi), Relative pressure / 538 kPa (5.4 kgf/cm2, 78 psi)
    		Actual tire inflation pressure
    		If 0 kPa (0 kgf/cm2, 0 psi) is displayed for absolute pressure or -100 kPa (-1.0 kgf/cm2, -14 psi) is displayed for relative pressure, data has not been received.*

    HINT:
    1. *: It may take about 2 or 3 minutes until the values are displayed.
    2. When no "ID Tire Inflation Pressure" data has changed, reset the tire pressure to the appropriate specified value and rotate the tire 90 to 270 degrees. Then rapidly release the tire pressure and recheck it.

    Result:

    Result
    		Proceed to
    All tire pressure readings are equal to specified values.
    		A
    Tire pressure values are not displayed.
    		B


B
REPLACE TIRE PRESSURE WARNING ECU (COROLLA_ZRE142 RM0000024T8027X.html)
A

END