Audio And Visual System (W/ Multi-Display Without Dvd Player) Data Signal Circuit Between Radio Receiver And Stereo Jack Adapter
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
AUDIO AND VISUAL SYSTEM (w/ Multi-display without DVD Player) - Data Signal Circuit between Radio Receiver and Stereo Jack Adapter |
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio and display receiver assembly via this circuit.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) |
Disconnect the E130 radio and display receiver assembly connector.
Disconnect the E120 No. 1 stereo jack adapter assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
E130-2 (US1-) - E120-2 (UDO-)
| Always
| Below 1 Ω
|
E130-3 (US1+) - E120-3 (UDO+)
| Always
| Below 1 Ω
|
E130-5 (USG1) - E120-5 (UJSS)
| Always
| Below 1 Ω
|
E130-2 (US1-) - Body ground
| Always
| 10 kΩ or higher
|
E130-3 (US1+) - Body ground
| Always
| 10 kΩ or higher
|
E130-5 (USG1) - Body ground
| Always
| 10 kΩ or higher
|
Text in Illustration*a
| Front view of wire harness connector
(to Radio and Display Receiver Assembly)
|
*b
| Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
