Engine Hybrid System. Corolla. Zre142 Aze141
2Zr-Fe Engine Control. Corolla. Zre142 Aze141
Ecm -- Removal |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
Disconnect the mass air flow meter connector and the 2 wire harness clamps.
![]() |
Disconnect the ventilation hose and loosen the hose clamp.
![]() |
Release the 2 clamps and remove the air cleaner cap sub-assembly with hose.
![]() |
3. REMOVE AIR CLEANER CASE SUB-ASSEMBLY |
Separate the air cleaner filter element from the air cleaner.
Disconnect the engine wire harness clamp from air cleaner case.
![]() |
Remove the 3 bolts and the air cleaner case.
4. REMOVE ECM |
Separate the wire harness clamp.
![]() |
Disconnect the 2 ECM connectors.
Push the locks on the 2 levers, then raise the levers, and disconnect the 2 ECM connectors.
- NOTICE:
- After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the connectors.
![]() |
Remove the 3 bolts and the ECM.
Remove the 4 screws and 2 ECM brackets.
![]() |