Steering Lock System Problem Symptoms Table

Steering. Corolla. Zre142 Aze141
Steering Column. Corolla. Zre142 Aze141

Steering Lock System -- Problem Symptoms Table


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed in order of probability in the causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related the this system before inspecting the suspected areas below.

Steering Lock System
Symptom
Suspected Area
See page
Steering wheel cannot be unlocked (the engine cannot be started).
Initialization
COROLLA_ZRE142 RM000001PWX02WX.html
Check for DTCs in the smart key system. (for Start Function)
COROLLA_ZRE142 RM000000XIZ0EQX.html
Check for DTCs in the engine immobiliser system. (for w/ smart key system)
COROLLA_ZRE142 RM000000QY6060X.html
Check that the Lck/Unlck Rec item in the Data List of the certification ECU displays YES within 10 seconds after starting the engine. (If it displays NO, see "No steering unlock" command in this table.)
COROLLA_ZRE142 RM000000XWV044X.html
Steering lock ECU power source circuit
COROLLA_ZRE142 RM000000XWQ04HX.html
Check the input signal from the IGE terminal of the steering lock ECU.
COROLLA_ZRE142 RM000000XWX04WX.html
Replace the steering lock ECU.
COROLLA_ZRE142 RM0000029SZ02TX.html
Steering wheel cannot be unlocked (no steering unlock command).
Check that the S Code Chk item in the Data List of the certification ECU displays OK. (If it displays NG, replace the ID code box.)
-
Check that the L Code Chk item in the Data List of the certification ECU displays OK. (If it displays NG, replace the ID code box.)
-
Replace the certification ECU.
-
Check for DTCs in the smart key system. (for Start Function)
COROLLA_ZRE142 RM000000XIZ0EQX.html
Check for DTCs in the engine immobiliser system. (for w/ smart key system)
COROLLA_ZRE142 RM000000QY6060X.html
With the engine switch off and the shift in the P position, open and close the drivers door. After that, check that the Lck/Unlck Rec item in the DATA LIST of the certification ECU displays YES within 10 seconds. (If it displays NO, see "No steering lock" command in this table.)
COROLLA_ZRE142 RM000000XWV044X.html
Steering lock ECU power source circuit
COROLLA_ZRE142 RM000000XWQ04HX.html
Check the input signal from the IGE terminal of the steering lock ECU.
COROLLA_ZRE142 RM000000XWX04WX.html
Replace the steering lock ECU.
COROLLA_ZRE142 RM0000029SZ02TX.html
Steering wheel cannot be locked (no steering lock command).
Courtesy light switch circuit
COROLLA_ZRE142 RM0000011T3080X.html
Check that the S Code Chk item in the Data List of the certification ECU displays OK. (If it displays NG, replace the ID code box.)
-
Check that the L Code Chk item in the Data List of the certification ECU displays OK. (If it displays NG, replace the ID code box.)
-
Replace the certification ECU.
-

Smart Key System
Symptom
Suspected Area
See page
Engine does not start.
Initialization
COROLLA_ZRE142 RM000001PWX02WX.html
Check for DTCs in the smart key system. (for Start Function)
COROLLA_ZRE142 RM000000XIZ0EQX.html
Check for DTCs in the engine immobiliser system. (for w/ smart key system)
COROLLA_ZRE142 RM000000QY6060X.html
Check that the engine switch is turned on (IG).
-
Check cranking operation. (If cranking operation is possible, see "Engine does not start due to the engine immobiliser" in this table.)
-
Check Shift P Sig in the Data List of the main body ECU and confirm that the shift signal is normal.
-
Check whether the steering wheel is locked or unlocked. (If it is locked, see "Steering wheel cannot be unlocked" in the steering lock function table.)
-
Steering lock ECU power source circuit
COROLLA_ZRE142 RM000000XWQ04HX.html
Check the output from the SLP terminal of the steering lock ECU.
COROLLA_ZRE142 RM000000XWW04QX.html
Check the output signal from the ST SW of the certification ECU (DTC B2275).
COROLLA_ZRE142 RM000001LUZ05FX.html
Replace the main body ECU.
-
Engine does not start due to the engine immobiliser.
Check that the L Code Chk item in the Data List of the certification ECU displays OK. (If it displays NG, replace the ID code box.)
-
Check that the Start Rqst item in the Data List of the certification ECU displays YES. (If it displays NO, replace the certification ECU.)
-
Check that the S Code Chk item in the Data List of the certification ECU displays OK. (If it displays NG, replace the ID code box.)
-
Replace the ID code box.
-