Drivetrain. Corolla. Zre142 Aze141
U341E Automatic Transmission Transaxle. Corolla. Zre142 Aze141
Speed Sensor -- Removal |
1. REMOVE NO. 2 CYLINDER HEAD COVER |
Hold the rear of the cover and raise it to disengage the 2 clips on the rear of the cover. Continue to raise the cover to disengage the 2 clips on the front of the cover to remove the cover.
- NOTICE:
- Attempting to disengage both front and rear clips at the same time may cause the cover to break.
![]() |
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
Disconnect the mass air flow meter connector and the 2 wire harness clamps.
![]() |
Disconnect the ventilation hose and loosen the hose clamp.
![]() |
Release the 2 clamps and remove the air cleaner cap sub-assembly with hose.
![]() |
3. REMOVE AIR CLEANER CASE |
Separate the air cleaner filter element from the air cleaner.
Disconnect the engine wire harness clamp from air cleaner case.
![]() |
Remove the 3 bolts and the air cleaner case.
4. REMOVE SPEED SENSOR |
Disconnect the speed sensor connector.
![]() |
Remove the bolt and speed sensor.
Remove the O-ring from the speed sensor.
![]() |