Ignition Key Cylinder Light Removal

Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.

Remove the cowl side trim clip.

Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

Remove the bolt <A> and the screw <B>.

Disengage the 2 claws and the DLC3.

Disconnect the hood lock control cable assembly.

Disengage the claw and the 4 clips.

Remove the air hose, disconnect the connector, and then remove the lower instrument panel finish panel LH.

Turn the steering wheel assembly to the right and remove the screw as shown in the illustration.

Turn the steering wheel assembly to the left and remove the screw as shown in the illustration.

Disengage the 2 claws and remove the steering column cover lower.

Disengage the claw and remove the steering column cover upper.

Using a screwdriver, widen the claws hanging onto the upper bracket by approximately 1.0 mm (0.039 in.).

Pull out the transponder key amplifier with the claw open.

NOTICE:

Using excessive force may damage the case.