Ultrasonic Sensor (For Rear Side) -- Removal |
| 1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT |
| 2. REMOVE SPARE WHEEL COVER CLAMP |
| 3. REMOVE SPARE WHEEL COVER ASSEMBLY |
| 4. REMOVE LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY |
Remove the bolt.
 |
Disengage the clip and remove the luggage compartment side tray assembly.
| 5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
Remove the 2 screws and the 2 No. 1 luggage compartment trim hooks.
 |
| 6. REMOVE REAR FLOOR FINISH PLATE |
Disengage the 7 clips and remove the rear floor finish plate.
 |
| 7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH |
Remove the 2 clips and the luggage compartment inner trim cover LH.
 |
| 8. REMOVE REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH |
Remove the 3 screws and rear quarter panel mudguard sub-assembly LH.
 |
| 9. REMOVE REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure for the RH side and the LH side.
| 10. REMOVE REAR BUMPER ASSEMBLY |
Put protective tape around the rear bumper assembly.
 |
Using a screwdriver, open the 2 rear bumper plates.
- HINT:
- Tape the screwdriver tip before use.
 |
Remove the 6 screws and 2 clips.
 |
Disconnect the connector.
 |
Disengage the grommet.
Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration.
- HINT:
- Use the same procedure for the RH side and LH side.
 |
Remove the rear bumper assembly.
| 11. REMOVE NO. 2 ULTRASONIC SENSOR |
Disconnect the connector.
 |
Remove the sensor retainer as shown in the illustration.
 |
Remove the No. 2 ultrasonic sensor as shown in the illustration.
 |
| 12. REMOVE NO. 1 ULTRASONIC SENSOR |
Disconnect the connector.
 |
Disengage the 2 claws and remove the No. 1 ultrasonic sensor.
 |