Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40
Rear Door Lock -- Inspection |
| 1. INSPECT REAR DOOR LOCK LH ASSEMBLY |
Remove the rear door lock assembly LH.
Check operation of the door lock motor.
Apply battery voltage and check operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1Lock Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4Unlock
 |
Check operation of the unlock detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection Measurement Condition Door Lock Condition Specified Condition 6 - 9 Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1Lock 10 kΩ or higher 6 - 9 Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4Unlock Below 1 Ω
 |
| 2. INSPECT REAR DOOR LOCK RH ASSEMBLY |
Remove the rear door lock assembly RH.
Check operation of the door lock motor.
Apply battery voltage and check operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1Lock Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4Unlock
 |
Check operation of the unlock detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection Measurement Condition Door Lock Condition Specified Condition 6 - 9 Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1Lock 10 kΩ or higher 6 - 9 Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4Unlock Below 1 Ω
 |