REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)
REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)
REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)
REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)
Electrical Key Oscillator (For Front Floor) -- Removal |
| 1. REMOVE FRONT DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedure for the RH side and LH side (CAMRY_ACV40 RM000001F2H02LX_02_0348.html).
| 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure for the RH side and LH side (CAMRY_ACV40 RM000001F2H02LX_02_0349.html).
| 3. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY |
Disengage the 4 claws.
 |
Disengage the 2 guides and remove the No. 2 under cover sub-assembly.
| 4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
Remove the bolt <A>.
Remove the 4 screws <B>.
 |
Disengage the 3 claws and 3 clips, and then remove the lower instrument panel sub-assembly.
| 5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.
 |
| 6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.
 |
| 7. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.
 |
| 8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.
 |
| 9. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) |
Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.
 |
with Seat Heater System:
Disconnect each connector.
| 10. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle) |
Open the lid of the upper console panel.
 |
Apply protective tape to the area shown in the illustration.
Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.
 |
with Seat Heater System:
Disconnect each connector.
| 11. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) |
Disengage the 3 claws and the 5 clips.
 |
Disconnect the connector and remove the upper console rear panel sub-assembly.
| 12. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) |
Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.
 |
| 13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Remove the 2 screws <F>.
 |
Disengage the 4 claws.
Disconnect each connector and remove the upper console panel sub-assembly.
- HINT:
- Set the shift lever in the D position.
| 14. REMOVE CONSOLE BOX POCKET |
Remove the console box pocket.
| 15. REMOVE CONSOLE BOX CARPET |
Remove the console box carpet.
 |
| 16. REMOVE CONSOLE BOX ASSEMBLY |
Remove the 2 screws <F>.
 |
Remove the 2 bolts <G> and the console box assembly.
 |
| 17. REMOVE NO. 1 CONSOLE BOX INSERT FRONT |
Remove the 3 screws <F>.
 |
Disengage the clip and remove the No. 1 console box insert front.
| 18. REMOVE FLOOR CARPET BRACKET RH |
Release the clamp.
 |
Turn back the floor carpet.
Remove the 3 clips.
 |
Remove the floor carpet bracket RH.
| 19. REMOVE ELECTRICAL KEY OSCILLATOR |
Disengage the clamp to remove the electrical key oscillator.
 |