Audio And Visual System Radio Receiver Power Source Circuit

Body Electrical. Camry. Acv40 Gsv40
Audio Visual. Camry. Acv40 Gsv40

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

INSPECT RADIO RECEIVER

AUDIO AND VISUAL SYSTEM - Radio Receiver Power Source Circuit


DESCRIPTION

This circuit provides power to the radio receiver.

WIRING DIAGRAM


Camry. Acv40 Gsv40.Audio Visual.Audio And Visual System.Audio And Visual System Radio Receiver Power Source Circuit


INSPECTION PROCEDURE

1.INSPECT RADIO RECEIVER


    Camry. Acv40 Gsv40.Audio Visual.Audio And Visual System.Audio And Visual System Radio Receiver Power Source Circuit

  1. Disconnect the radio receiver connector.

  1. Measure the resistance according to the value in the table below.

    Standard resistance:
    Tester connection
    		Condition
    		Specified condition
    GND - Body ground
    		Always
    		Below 1 Ω

  1. Measure the voltage according to the values in the table below.

    Standard voltage:
    Tester connection
    		Condition
    		Specified condition
    B - GND
    		Always
    		10 to 14 V
    ACC - GND
    		Ignition SW ON
    		10 to 14 V


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE