Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK LUGGAGE COMPARTMENT DOOR OPEN FUNCTION

CHECK LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (CANCEL CONDITION)

PERFORM ACTIVE TEST USING INTELLIGENT TESTER (LUGGAGE COMPARTMENT DOOR LOCK (MOTOR))

READ VALUE USING INTELLIGENT TESTER (LUGGAGE COMPARTMENT DOOR LOCK (COURTESY SWITCH))

INSPECT LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY

CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - LUGGAGE COMPARTMENT DOOR LOCK CYLINDER)

CHECK HARNESS AND CONNECTOR (LUGGAGE COMPARTMENT DOOR LOCK CYLINDER - BODY GROUND)

READ VALUE USING INTELLIGENT TESTER (COURTESY SWITCH)

INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (MOTOR)

CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - LUGGAGE COMPARTMENT DOOR LOCK)

CHECK HARNESS AND CONNECTOR (LUGGAGE COMPARTMENT DOOR LOCK - BODY GROUND)

INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (COURTESY SWITCH)

CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - LUGGAGE COMPARTMENT DOOR LOCK)

READ VALUE USING INTELLIGENT TESTER (TRUNK OPEN MODE)

READ VALUE USING INTELLIGENT TESTER (LUGGAGE COMPARTMENT DOOR OPENER SWITCH)

CHECK WAVE ENVIRONMENT

PERFORM KEY DIAGNOSTIC MODE INSPECTION

CHECK HARNESS AND CONNECTOR (CERTIFICATION ECU - OUTSIDE ELECTRICAL KEY OSCILLATOR)

REPLACE OUTSIDE ELECTRICAL KEY OSCILLATOR (for Luggage Compartment)

CHECK OUTSIDE ELECTRICAL KEY OSCILLATOR (OPERATION)

INSPECT LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH

CHECK HARNESS AND CONNECTOR (CERTIFICATION ECU - LUGGAGE COMPARTMENT DOOR OPENER SWITCH)

CHECK HARNESS AND CONNECTOR (LUGGAGE COMPARTMENT DOOR OPENER SWITCH - BODY GROUND)

ENTRY AND START SYSTEM - Luggage Compartment Door Entry Unlock Function does not Operate when Key is Outside Luggage Compartment


DESCRIPTION

When the luggage compartment door entry unlock function does not operate, one of the following may be the cause: 1) luggage compartment door opener outer switch malfunction; 2) communication malfunction between the outside electrical key oscillator (for luggage compartment) and certification ECU (smart key ECU assembly); 3) the main body ECU (instrument panel junction block assembly) receives the luggage compartment door opener outer switch ON signal, but is unable to send the signal to the certification ECU (smart key ECU assembly) through CAN communication; or 4) certification ECU (smart key ECU assembly) malfunction.

WIRING DIAGRAM


Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment


INSPECTION PROCEDURE

NOTICE:
The entry and start system (for entry function) uses a multiplex communication system (LIN communication system) and CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting (CAMRY_ACV40 RM000000XU703SX.html). Troubleshoot the entry and start system (for entry function) after confirming that the communication system is functioning properly.
1.CHECK LUGGAGE COMPARTMENT DOOR OPEN FUNCTION

  1. Check that luggage compartment door open functions can be operated by using the luggage compartment door opener outer switch and electrical key transmitter.

    Result:
    Result
    		Proceed to
    Both luggage compartment door opener outer switch and electrical key transmitter do not operate
    		A
    Luggage compartment door opener outer switch does not operate
    		B
    Electrical key transmitter does not operate
    		C


B
Go to step 14

C
REPLACE ELECTRICAL KEY TRANSMITTER
A


2.CHECK LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (CANCEL CONDITION)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Check that the luggage compartment door lock cylinder assembly is in the cancel position.

    Result:
    Result
    		Proceed to
    Except cancel position
    		A
    Cancel position
    		B


B
PERFORM CANCELLATION OF LUGGAGE COMPARTMENT DOOR OPEN CANCEL FUNCTION (Proceed to Customize Parameters) (CAMRY_ACV40 RM000000XUG037X.html)
A


3.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (LUGGAGE COMPARTMENT DOOR LOCK (MOTOR))

  1. Connect the intelligent tester to the DLC3.

  1. Turn the engine switch on (IG).

  1. Turn the intelligent tester on.

  1. Enter the following menus: Body / Main Body / Active Test.

  1. Perform the Active Test according to the display on the intelligent tester.

    Main Body (Main Body ECU (Instrument Panel Junction Block))
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Trunk and Back-door Open
    		Luggage compartment door lock motor
    		ON/OFF
    		-
    OK:
    Luggage compartment door lock motor operates according to the intelligent tester operation.


NG
Go to step 8
OK


4.READ VALUE USING INTELLIGENT TESTER (LUGGAGE COMPARTMENT DOOR LOCK (COURTESY SWITCH))

  1. Enter the following menus: Body / Main Body / Data List.

  1. Read the Data List according to the display on the intelligent tester.

    Main Body (Main Body ECU (Instrument Panel Junction Block Assembly))
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Luggage Courtesy SW
    		Luggage compartment door courtesy light switch signal / ON or OFF
    		ON: Luggage compartment door open
    OFF: Luggage compartment door closed
    		-
    OK:
    On the intelligent tester screen, the item changes between ON and OFF according to above chart.


NG
Go to step 12
OK


5.INSPECT LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


  1. Remove the luggage compartment door lock cylinder assembly (CAMRY_ACV40 RM000001OIM01LX_01_0025.html).


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 3
    		Open position
    		Below 1 Ω
    1 - 3
    		Original position
    		10 kΩ or higher
    2 - 3
    		Original position
    		10 kΩ or higher
    2 - 3
    		Cancel position
    		Below 1 Ω


NG
REPLACE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (CAMRY_ACV40 RM000001OIM01LX_01_0025.html)
OK


6.CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - LUGGAGE COMPARTMENT DOOR LOCK CYLINDER)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Disconnect the main body ECU (instrument panel junction block assembly) connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E8-2 (TCAN) - S18-2
    		Always
    		Below 1 Ω
    E8-2 (TCAN) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


7.CHECK HARNESS AND CONNECTOR (LUGGAGE COMPARTMENT DOOR LOCK CYLINDER - BODY GROUND)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    S18-3 - Body ground
    		Always
    		Below 1 Ω


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

8.READ VALUE USING INTELLIGENT TESTER (COURTESY SWITCH)

  1. Enter the following menus: Body / Main Body / Data List.

  1. Read the Data List according to the display on the intelligent tester.

    Main Body (Main Body ECU (Instrument Panel Junction Block Assembly))
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Luggage Courtesy SW
    		Luggage compartment door courtesy light switch signal / ON or OFF
    		ON: Luggage compartment door open
    OFF: Luggage compartment door closed
    		-
    OK:
    On the intelligent tester screen, the item changes between ON and OFF according to above chart.


NG
Go to step 11
OK


9.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (MOTOR)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Remove the luggage compartment door lock assembly (CAMRY_ACV40 RM000001OIQ00ZX.html).

  1. Move the door lock to the lock position.

  1. Apply battery voltage to the door lock motor and check the operation of the door lock motor.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    		Unlocks


NG
REPLACE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (CAMRY_ACV40 RM000001OIQ00ZX.html)
OK


10.CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - LUGGAGE COMPARTMENT DOOR LOCK)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Disconnect the main body ECU (instrument panel junction block assembly) connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E7-1 (TR+) - S5-1
    		Always
    		Below 1 Ω
    E7-1 (TR+) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

11.CHECK HARNESS AND CONNECTOR (LUGGAGE COMPARTMENT DOOR LOCK - BODY GROUND)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    S5-2 - Body ground
    		Always
    		Below 1 Ω


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (CAMRY_ACV40 RM000001OIQ00ZX.html)

12.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (COURTESY SWITCH)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Remove the luggage compartment door lock assembly (CAMRY_ACV40 RM000001OIQ00ZX.html).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    2 - 3
    		Unlocked
    		Below 1 Ω
    2 - 3
    		Locked
    		10 kΩ or higher


NG
REPLACE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (CAMRY_ACV40 RM000001OIQ00ZX.html)
OK


13.CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - LUGGAGE COMPARTMENT DOOR LOCK)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Disconnect the main body ECU (instrument panel junction block assembly) connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E6-25 (LGCY) - S5-3
    		Always
    		Below 1 Ω
    E6-25 (LGCY) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

14.READ VALUE USING INTELLIGENT TESTER (TRUNK OPEN MODE)

  1. Connect the intelligent tester to the DLC3.

  1. Turn the engine switch on (IG).

  1. Turn the intelligent tester on.

  1. Enter the following menus: Body / Entry & Start / Data List.

  1. Read the Data List according to the display on the intelligent tester.

    Entry & Start (Certification ECU (Smart Key ECU Assembly))
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Trunk Open Mode
    		Trunk Open Mode / ON or OFF
    		Customization status displayed
    		-
    Result:
    Result
    		Proceed to
    Entry luggage open function is ON
    		A
    Entry luggage open function is OFF
    		B


B
PERFORM CANCELLATION OF ENTRY LUGGAGE COMPARTMENT DOOR OPEN CANCEL FUNCTION (Proceed to Customize Parameters) (CAMRY_ACV40 RM000000XUG037X.html)
A


15.READ VALUE USING INTELLIGENT TESTER (LUGGAGE COMPARTMENT DOOR OPENER SWITCH)

  1. Read the Data List according to the display on the intelligent tester.

    Entry & Start (Certification ECU (Smart Key ECU Assembly))
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Tr/B-Door Unlock SW
    		Luggage compartment door opener outer switch / ON or OFF
    		ON: Luggage compartment door opener outer switch is pushed
    OFF: Luggage compartment door opener outer switch is not pushed
    		-
    OK:
    On the intelligent tester screen, the item changes between ON and OFF according to above chart.


NG
Go to step 21
OK


16.CHECK WAVE ENVIRONMENT


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Bring the electrical key transmitter near the outside electrical key oscillator (luggage compartment), and perform an entry luggage compartment open function check.

    NOTICE:
    If the key is brought within 0.2 m (0.656 ft) of the rear bumper, communication is not possible.
    HINT:
    1. When pressing the luggage compartment door opener outer switch, hold the electrical key transmitter about 1 m (3.28 ft.) above the ground and about 0.3 m (0.984 ft.) away from the vehicle as shown in the illustration.
    2. When the electrical key transmitter is brought near the electrical key antenna, the possibility of wave interference decreases, and it can be determined if wave interference is causing the problem symptom.
    3. If the operation is normal, the possibility of wave interference is high. Also, added vehicle components may cause wave interference. If installed, remove them and perform the operation check.
    OK:
    Entry functions operate normally.


NG
Go to step 17
OK

AFFECTED BY WAVE INTERFERENCE

17.PERFORM KEY DIAGNOSTIC MODE INSPECTION


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Diagnostic mode inspection (outside electrical key oscillator (luggage compartment))

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Entry & Start / Utility / Communication Check (Key Diag Mode) / Overhead + Luggage (outside).

    5. When the electrical key transmitter is held at the same height as the rear bumper upper surface aligning it with the center of the rear of the vehicle, check that the wireless door lock buzzer sounds.

      HINT:
      1. Hold the electrical key transmitter at the same height as the rear bumper upper surface and align with the center of the rear of the vehicle (0.7 to 1.0 m (2.30 to 3.28 ft.)). Make sure that the direction of the key is as shown in the illustration.
      2. If the buzzer sounds, it can be determined that the luggage compartment exterior transmitter is operating normally.
      OK:
      Wireless door lock buzzer sounds.


NG
Go to step 18
OK

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

18.CHECK HARNESS AND CONNECTOR (CERTIFICATION ECU - OUTSIDE ELECTRICAL KEY OSCILLATOR)

  1. Disconnect the certification ECU (smart key ECU assembly) connector.



    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Disconnect the outside electrical key oscillator connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E74-32 (CG8B) - S20-2 (CLGB)
    		Always
    		Below 1 Ω
    E74-31 (CLG8) - S20-1 (CLG5)
    		Always
    		Below 1 Ω
    E74-32 (CG8B) - Body ground
    		Always
    		10 kΩ or higher
    E74-31 (CLG8) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


19.REPLACE OUTSIDE ELECTRICAL KEY OSCILLATOR (for Luggage Compartment)

  1. Replace the outside electrical key oscillator (for luggage compartment) (CAMRY_ACV40 RM000001LTW00DX.html).


NEXT


20.CHECK OUTSIDE ELECTRICAL KEY OSCILLATOR (OPERATION)

  1. Check that the entry functions operate normally.

    OK:
    Entry functions operate normally.


NG
REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
OK

END (OUTSIDE ELECTRICAL KEY OSCILLATOR WAS DEFECTIVE)

21.INSPECT LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH


  1. Disconnect the luggage compartment door opener outer switch connector.


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    4 - 8
    		Luggage compartment door opener outer switch not pushed (OFF)
    		10 kΩ or higher
    4 - 8
    		Luggage compartment door opener outer switch pushed (ON)
    		Below 1 Ω


NG
REPLACE LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH (CAMRY_ACV40 RM000001OIW02LX.html)
OK


22.CHECK HARNESS AND CONNECTOR (CERTIFICATION ECU - LUGGAGE COMPARTMENT DOOR OPENER SWITCH)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Disconnect the certification ECU (smart key ECU assembly) connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E74-7 (TSW5) - S19-4
    		Always
    		Below 1 Ω
    E74-7 (TSW5) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


23.CHECK HARNESS AND CONNECTOR (LUGGAGE COMPARTMENT DOOR OPENER SWITCH - BODY GROUND)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Entry And Start System Luggage Compartment Door Entry Unlock Function Does Not Operate When Key Is Outside Luggage Compartment

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    S19-8 - Body ground
    		Always
    		Below 1 Ω


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)