Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40
Entry And Start System -- Data List / Active Test |
| READ DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry & Start or Main Body / Data List.
Read the Data List according to the display on the intelligent tester.
Entry & Start (Certification ECU (Smart Key ECU Assembly)) Tester Display Measurement Item/Range Normal Condition Diagnostic Note D-Door Touch Sensor Driver side door touch sensor / ON or OFF ON: Touch sensor is touched
OFF: Touch sensor is not touched- P-Door Touch Sensor Front passenger side door touch sensor / ON or OFF ON: Touch sensor is touched
OFF: Touch sensor is not touched- D-Door Trigger Switch Driver side door lock switch / ON or OFF ON: Entry lock switch is pressed
OFF: Entry lock switch is not pressed- P-Door Trigger Switch Front passenger side door lock switch / ON or OFF ON: Entry lock switch is pressed
OFF: Entry lock switch is not pressed- Tr/B-Door Unlock Switch Luggage compartment door opener outer switch / ON or OFF ON: Luggage compartment door opener outer switch is pushed
OFF: Luggage compartment door opener outer switch is not pushed- Ignition Switch Engine switch / ON or OFF ON: Engine switch is on (IG)
OFF: Engine switch is off- ACC Switch Engine switch / ON or OFF ON: Engine switch is on (ACC)
OFF: Engine switch is off- Power Save Cnt 10 Min Power save counter - 10 minutes / Min: 0; Max: 255 Within range from 0 to 255 - Power Save Cnt 5 Day Power save counter - 5 days / Min: 0; Max: 255 Within range from 0 to 255 - Power Save Cnt 14 Day Power save counter - 14 days / Min: 0; Max: 255 Within range from 0 to 255 - Auto Entry Cancel SW Entry function cancel / ON or OFF Mode status displayed - Parking Wait Time Parking Wait Time / 0.5, 1.5, 2.5, 5 Customization status displayed - Trunk Open Mode Trunk Open Mode / ON or OFF Customization status displayed - Key Low Battery Warning Key Low Battery Warning / ON or OFF Customization status displayed - Main Body (Main Body ECU (Instrument Panel Junction Block Assembly)) Tester Display Measurement Item/Range Normal Condition Diagnostic Note D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF ON: Driver side door open
OFF: Driver side door closed- P Door Courtesy SW Front passenger side door courtesy light switch signal / ON or OFF ON: Front passenger side door open
OFF: Front passenger side door closed- RR Door Courtesy SW Rear door courtesy light switch RH signal / ON or OFF ON: Rear door RH open
OFF: Rear door RH closed- RL Door Courtesy SW Rear door courtesy light switch LH signal / ON or OFF ON: Rear door LH open
OFF: Rear door LH closed- Luggage Courtesy SW Luggage compartment door courtesy light switch signal / ON or OFF ON: Luggage compartment door open
OFF: Luggage compartment door closed-
| PERFORM ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry & Start or Main Body / Active Test.
Perform the Active Test according to the display on the intelligent tester.
*: w/ Electrical Key AntennaEntry & Start (Certification ECU (Smart Key ECU Assembly)) Tester Display Test Part Control Range Diagnostic Note Overhead Tuner Power Supply ON Entry door control receiver ON / OFF - Inside Luggage Tuner Power Supply ON* Luggage receiver ON / OFF - D-Seat Outside Transmitter Door electrical key oscillator (driver side) ON / OFF - P-Seat Outside Transmitter Door electrical key oscillator (front passenger side) ON / OFF - Fr-Seat Inside Transmitter Indoor electrical key oscillator (front floor) ON / OFF - Rr-Seat Inside Transmitter Indoor electrical key oscillator (rear floor) ON / OFF - Inside Trunk/Backdoor Transmitter Indoor electrical key oscillator (luggage compartment) ON / OFF - Outside Trunk/Backdoor Transmitter Outside electrical key oscillator (luggage compartment) ON / OFF - D-Seat Select Driver side select ON / OFF - P-Seat Select Front passenger side select ON / OFF - Main Body (Main Body ECU (Instrument Panel Junction Block Assembly)) Tester Display Test Part Control Range Diagnostic Note Trunk and Back-door Open Luggage compartment door lock motor ON / OFF -