Rear Airbag Sensor Removal

Restraints. Camry. Acv40 Gsv40
Supplemental Restraint System. Camry. Acv40 Gsv40

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

  4. REMOVE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)

  5. REMOVE REAR DOOR SCUFF PLATE (for Fold Down Seat Type)

  6. REMOVE REAR DOOR SCUFF PLATE (for Reclining Seat Type)

  7. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for Fold Down Seat Type)

  8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for Reclining Seat Type)

  9. REMOVE ROOF SIDE INNER GARNISH (for Fold Down Seat Type)

  10. REMOVE REAR SIDE SEAT BACK ASSEMBLY (for Fold Down Seat Type)

  11. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY (for Reclining Seat Type)

  12. REMOVE REAR AIRBAG SENSOR

Rear Airbag Sensor -- Removal


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.


1. PRECAUTION
CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (CAMRY_ACV40 RM000000KT1054X.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.


3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)


    Camry. Acv40 Gsv40.Supplemental Restraint System.Airbag System.Rear Airbag Sensor Removal

  1. Detach the 2 front hooks of the seat cushion from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame can be deformed easily.

    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the step above for the other hook.

  1. Remove the seat cushion.



4. REMOVE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)


    Camry. Acv40 Gsv40.Supplemental Restraint System.Airbag System.Rear Airbag Sensor Removal

  1. Detach the 2 front hooks of the seat cushion from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame can be deformed easily.

    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the step above for the other hook.

  1. Remove the seat cushion.



5. REMOVE REAR DOOR SCUFF PLATE (for Fold Down Seat Type)


    Camry. Acv40 Gsv40

  1. Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.



6. REMOVE REAR DOOR SCUFF PLATE (for Reclining Seat Type)


    Camry. Acv40 Gsv40

  1. Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.



7. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for Fold Down Seat Type)


8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for Reclining Seat Type)


9. REMOVE ROOF SIDE INNER GARNISH (for Fold Down Seat Type)


    Camry. Acv40 Gsv40

  1. Disengage the 5 clips and 2 claws, and remove the roof side inner garnish LH.



10. REMOVE REAR SIDE SEAT BACK ASSEMBLY (for Fold Down Seat Type)


    Camry. Acv40 Gsv40

  1. Remove the bolt and rear side seatback assembly LH.



11. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY (for Reclining Seat Type)


    Camry. Acv40 Gsv40

  1. Remove the bolt.

  1. Disengage the 2 clips and the claw and then separate the reclining remote control lever sub-assembly.



    Camry. Acv40 Gsv40

  1. Separate the rear seat reclining control cable and remove the reclining remote control lever sub-assembly.



12. REMOVE REAR AIRBAG SENSOR


    Camry. Acv40 Gsv40

  1. Disconnect the connector.

  1. Remove the bolt and rear airbag sensor.