Stop Light Switch (For Sedan) - Installation

1. Install stop light switch

2. Connect cable to negative battery terminal

​

1. Install the stop light switch into the adjuster until it slightly touches the brake pedal.

   NOTICE:

   Do not depress the brake pedal.

   
   
   2. Make a quarter turn clockwise to install the stop light switch.

      NOTICE:

      Do not depress the brake pedal.

      HINT:

      The turning torque for installing the stop light switch is as below.

      Torque:

      1.5 N*m{15 kgf*cm, 13 in.*lbf}or less

2. Check the stop light switch clearance.

   Stop light switch clearance:

   0.5 to 2.6 mm (0.020 to 0.102 in.)
   

3. Connect the stop light switch connector to the stop light switch.

Torque:

5.4 N*m{55 kgf*cm, 48 in.*lbf}