Crankshaft Position Sensor - Installation

1. Install crankshaft position sensor

2. Connect cable to negative battery terminal

3. Check for engine oil leakage

4. Install engine under cover rh

5. Install engine under cover sub-assembly (for rough road area specification vehicles)

​

1. Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.

2. Install the crankshaft position sensor with the bolt.

   Torque:

   7.5 N*m{76 kgf*cm, 66 in.*lbf}

   NOTICE:

   Do not twist the O-ring.

3. Connect the crankshaft position sensor connector.

Torque:

5.4 N*m{55 kgf*cm, 48 in.*lbf}