REMOVE RADIATOR ASSEMBLY
-
Remove the radiator.
2. REMOVE CRANKSHAFT PULLEY
-
Turn the crankshaft pulley, and align the notch with the timing mark "0" of the timing chain cover.
-
Check that the timing marks of the camshaft timing gears and sprockets are aligned with the timing marks of the bearing caps as shown in the illustration.
-
Using SST, hold the crankshaft pulley and loosen the pulley set bolt.
SST
09213-54015 (91651-60855) 09330-00021
-
Using the pulley set bolt and SST, remove the crankshaft pulley.
SST
09950-50013 (09951-05010,09952-05010,09953-05020,09954-05030)
3. REMOVE FRONT CRANKSHAFT OIL SEAL
-
Using a screwdriver, pry out the oil seal.
NOTICE:
Be careful not to damage the crankshaft. Wrap the tip of the screwdriver with tape.