Brand:
Toyota
Model Name:
Camry ACV40 GSV40
Manual:
Repair Manual
Section:
Service Specifications
Title:
2Gr-Fe Starting
| Starter assembly | Specified current | 90 A or less at 11.5 V | |
| Magnet starer switch assembly | Tester Connection | Terminal 50 - Terminal C | Below 1 Ω |
| Terminal 50 - Switch body | Below 2 Ω | ||
| Starter armature assembly | Tester Connection | Segment - Segment | Below 1 Ω |
| Commutator - Armature coil core | 10 kΩ or higher | ||
| Standard depth | 3.1 to 3.8 mm (0.122 to 0.149 in.) | ||
| Minimum depth | 3.8 mm (0.149 in.) | ||
| Brush length | Standard length | 9.0 mm (0.354 in.) | |
| Minimum length | 4.0 mm (0.157 in.) | ||
| Tester Connection | Positive (+) brush - Negative (-) brush | 10 kΩ or higher | |
| Starter relay | Specified condition | 3 - 5 (when battery voltage is applied to terminals 1 and 2) | Below 1 Ω |
| 3 - 5 | 10 kΩ or higher | ||
| Starter cut relay | Specified condition | 3 - 5 (when battery voltage is applied to terminals 1 and 2) | Below 1 Ω |
| 3 - 5 | 10 kΩ or higher | ||
| Ignition relay | Specified condition | 3 - 5 (when battery voltage is applied to terminals 1 and 2) | Below 1 Ω |
| 3 - 5 | 10 kΩ or higher | ||
| Engine switch | Resistance | Pushed: 7 (SS1) - 5 (GND) | Below 1 Ω |
| Pushed: 2 (SS2) - 5 (GND) | |||
| Not pushed: 7 (SS1) - 5 (GND) | 10 kΩ or higher | ||
| Not pushed: 2 (SS2) - 5 (GND) | |||
| Battery positive (+) → Terminal 11 (SWIL) Battery negative (-) → Terminal 4 (COM) or 5 (GND) | Illuminates | ||
| Battery positive (+) → Terminal 12 (INDS) Battery negative (-) → Terminal 4 (COM) or 5 (GND) | |||
| Battery positive (+) → Terminal 13 (INDW) Battery negative (-) → Terminal 4 (COM) or 5 (GND) | |||
| Ignition switch | Resistance | LOCK: Between all terminals | 10 kΩ or higher |
| ACC: 2 (ACC) - 4 (AM1) | Below 1 Ω | ||
| ON: 1 (IG1) - 2 (ACC) - 4 (AM1) | |||
| ON: 5 (AM2) - 6 (IG2) | |||
| START: 1 (ST1) - 3 (ST1) - 4 (AM1) | |||
| START: 5 (AM2) - 6 (IG2) - 7 (ST2) | |||