Power Window Master Switch - Installation(2006/01 - 2007/12)

1. Install power window regulator master switch assembly

2. Install front door inner glass weatherstrip

3. Install front door inside handle sub-assembly

4. Install front door trim board sub-assembly

5. Install courtesy light assembly

6. Install assist grip cover

7. Install front door inside handle bezel plug

8. Install front door lower frame bracket garnish

9. Initialize power window control system

​

1. Connect the connector.

2. Install the power window regulator master switch assembly with the 3 screws.

1. Engage the 4 claws and install the front door inner glass weatherstrip.

1. Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

2. Engage the 2 claws and install the front door inside handle sub-assembly.

1. Connect each connector.

2. Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.

3. Engage the 9 clips and install the front door trim board to the front door panel.

4. Install the 3 screws and clip (A).

1. Connect the connector.

2. Engage the claw and install the courtesy light assembly.

1. Engage the 6 claws and install the assist grip cover.

1. Engage the 3 claws and install the front door inside handle bezel plug.

1. Engage the 2 clips and install the front door lower frame bracket garnish.